I hate Time Warner!!!

arbysguy · 4 days

I'm not a sports fan, arent the games broadcast on local channels though? If so, you wont miss out on the games.

arbysguy · 4 days

Assuming you can get Internet that works: http://www.reddit.com/r/cordcutters

nomdeweb · 4 days

Futurama reference.

bitter_cynical_angry · 6 days

There's a bunch on Amazon too. http://www.amazon.com/Whiteside-Piece-Brass-Set-up-Gauges/dp/B000EHPEFA

nomdeweb · 7 days

Zero understanding might be a little extreme. I think most of them know that it is a series of tubes and most definitely not a truck.

toThe9thPower · 9 days

Correction: Yes, it does.

xanothis23 · 9 days

I'm going to disagree here. The lunch portions are incredibly small and still overpriced. The food is quite good, but it's not a cheap eat.

dragonworthy · 10 days

Higher resolution, but perhaps lower quality scan. http://i.imgur.com/j8krN.jpg

mepejuma · 10 days

I'm currently doing the same thing, i just powerwashed it and was thinking of painting. What stain did you use?

ky420 · 23 days

Also, if you're doing the electrolytic de-rusting, he says steel is the best, but I've found that carbon is superior as it doesn't flash rust when you pull it back out.

Details here: http://www.fordgarage.com/pages/electrolyticderusting.htm

johnothetree · 28 days

Since it's not really obvious, this will only work for content coming from your PC.

johnothetree · 28 days

https://www.google.com/search?sourceid=chrome&ie=UTF-8&q=philips+ambilight#q=philips+ambilight&hl=en&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=GImaT8ncI_SG0QHXqe2bDw&ved=0CIIBEK0E&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=d4335110cce76f8c&biw=1680&bih=949

Tabdelineated · 1 month

Because it isn't secure, we simply haven't used it. (The children are never there without us in the hallway.)

Tabdelineated · 1 month

I installed a child safety gate at the top of our stairs, at the time the drywall screws I put in as pilots seemed very sturdy. Now the latch is loose and I wish I had done it with drywall anchors.

Wage10 · 1 month

I am not an experienced woodworker, but from looking at that picture you will probably need a lathe to make the leg (and a lathe will let you make most of the standard chess set).

You'll need something to cut the curves on the edge, you can do it with a router I think. You can probably get the wood as molding and save a lot of time/money.

The corners are mitered, so you'll probably want a miter jig of some form.

Again, I'm only beginning, so I'm just guessing on a lot of this.

Sniper1154 · 1 month

http://www.bridgecitytools.com/default/tools/jointmaker/accessories/jmp-crosscut-a-replacement-blades-5pk.html

Sniper1154 · 1 month

Let us know if you do, and share the plans!

Cellvaunt · 1 month

Fair enough. :-)

Cellvaunt · 1 month

Print Screen works just fine in Win 7.

liquidhot · 1 month

Interesting. I was told that Titebond is generally considered stronger than the wood itself.

liquidhot · 1 month

I used zipties and taped them to the handle to keep them from splitting. I also used zipties for the mug cylinder portion

liquidhot · 1 month

.75 inch. But it really should have been .5 inch, I thought I would need the extra thickness to get a good glue surface, but I think it was overkill.

liquidhot · 1 month

Very cool!

liquidhot · 1 month

I didn't take any unfortunately. I plan to do a few more with a hardwood and I will make sure I get a lot of step by step shots.

liquidhot · 1 month

My understanding is that Epoxy becomes inert and basically like plastic once it cures. Here is wood central's take on "food safe". http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=finishing&file=articles_497.shtml

EDIT: Also, the epoxy does contain Bisphenol A (BPA) which is a little controversial and that's why if you buy products for infants a lot of them are labeled as BPA Free. However, it's practically in every other plastic.

Three-Year Club	reddit mold
Verified Email	Secret Santa 2009

liquidhot

TROPHY CASE

you'll need to login or register to do that

create a new account

login